SX-600 Ethernet to Wireless Client Adapter Setup Guide
SX-600 User’s Manual 107. Configure your wireless settings to match that of your wireless network. First choose the Wireless Mode and type in th
SX-600 User’s Manual 118. Enter your wireless security settings to match that of your wireless network network. Key Selection If WEP encryptio
SX-600 User’s Manual 12used in TTLS, LEAP, and PEAP configurations. The password may be a text string, or a string of hex bytes prefixed with &ap
SX-600 User’s Manual 139. Click Finish after you have verified your settings are correct.
SX-600 User’s Manual 14Web Browser Interface Open any web browser from your PC (eg: Internet Explorer or Firefox) and type the IP Address of the
Connecting to your network enabled device SX-600 User’s Manual 15Once you have configured the SX-600 to communicate with your wireless network, y
SX-600 User’s Manual 16• You can reset the unit to factory default by holding in the button on the back of the SX-600 for more than 5 seconds an
SX-600 User’s Manual 17Rear Button Function Depressed for > 1/8 second & < 5 seconds Toggle wired configuration mode – each time tog
SX-600 User’s Manual 18Where to Get Help silex offers several customer support options to assist you in the event you experience difficulties wit
SX-600 User’s Manual 19Safety and Regulatory Notices Information for United States Users This equipment has been tested and found to comply with
SX-600 User’s Manual 2Notice silex technology america, Inc. SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF THIS
SX-600 User’s Manual 20Declaration of Conformity (FCC) According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or
SX-600 User’s Manual 21successful communication.
SX-600 User’s Manual 22Information for European Users The server and its built-in 802.11b, and 802.11g wireless technology is in compliance with
SX-600 User’s Manual 3Table of Contents Introduction ...
SX-600 User’s Manual 4Introduction The SX-600 Ethernet to Wireless Client Adapter allows you to easily add 802.11 b/g wireless capabilities to an
SX-600 User’s Manual 5Wireless Requirements The SX-600 allows you to connect to a wireless network consisting of either of the following: • An 8
SX-600 User’s Manual 6Configure the Network Settings on your Computer The default IP Address of the SX-600 is 169.254.111.111. You should set yo
SX-600 User’s Manual 73. Select Internet Protocol (TCP/IP) and click Properties. 4. Select Obtain an IP Address Automatically in the TCP/IP p
SX-600 User’s Manual 8Configure the SX-600 The SX-600 can be configured a variety of ways. ExtendView for Windows 1. Insert the CD supplied i
SX-600 User’s Manual 95. You should see the SX-600 in the list. If you do not see the SX-600 in the list, start again and verify all the steps w
Comments to this Manuals